Configuring Prijector on Corp mode

Numberals-01.png

 How do I Configure Prijector on Corp mode?

  1. Unpack the Prijector Box and pull out the Power and HDMI Cables.
  2. Connect power adapter to the Prijector device and to the power supply socket.
  3. Connect the HDMI cable to the HDMI Out on the device and the HDMI input on the TV/projector.
  4. Make sure you switch the TV source to the HDMI you have connected Prijector to.
  5. Connect your mouse to usb port on the Prijector or use Prijector Remote Control.
  6. Prijector Screen should Appear on Your Display.
  7. Click on the Corp Mode on the Top Right.
  8. Please configure your network Wifi / Ethernet.
  9. Prijector is now setup in Corp mode and you will see a IP address as shown in the picture below.

 Configuring Prijector app on your computer

  1. Download Prijector App from www.prijector.com/downloads/
  2. Install the Application.
  3. Make sure your laptop is connected to the same Network (Wifi/Ethernet) as Prijector.
  4. Open the Prijector App > enter the IP address > click on share button.